New from Bouncer's is Bead Juice. A Nano Tech Exterior Protection Sealant that can be applied either wet or dry. - Bead Juice is perfectly safe to use on any other coating or existing wax layers. - Can also be used on all exterior inc glass/plastics/alloys etc. Keep your car protected and looking cleaner for longer.
Dry method. As you would a Quick Detailer, very light mist onto a panel, spread well with soft buffing cloth, turn over cloth and buff again if necessary. Done.
Wet Method. After your usual wash method i.e rinse after shampoo, spray the product onto the wet panel and rinse off straightaway. - The product is very active, so you can 'level' out the product as well by spreading with a soft MF or sponge applicator, then rinse off - Dry car normally.
Either way, you are looking at 3-4++ months strong protection. Providing strong beading and sheeting, Bead Juice is certainly a product to have, its so easy to use, its almost 'cheating'
To maintain protection on your vehicle. a wax safe / PH7 pure shampoo is recommended. Our Shampoo 'Slick Mick' will compliment this product to keep your car, looking its best
Available in 500ml and 1 Litre. Both come supplied with Trigger Head.
This product is ready to use and does not require dilution.
Bead Juice is an Active spray sealant. On wet application it is imperative to fully rinse and remove product fully via pressure washer and not to allow to linger or allow to dry on paintwork. Use sparingly as over application and or product not fully removed can result in the product leaving a residue behind. - Test on a small area first. If the paint does show areas of residue, this can be removed using a micro polish on affected areas.