Wolfgang Finishing Glaze 3.0

Wolfgang Finishing Glaze 3.0 by Menzerna is a special gloss-enhancing glaze and finishing polish that restores the maximum shine to automotive paint after compounding. Use Wolfgang Finishing Glaze 3.0 on dull paint to revive the deep color and intense shine. Your detail isn't finished until you use Wolfgang Finishing Glaze 3.0.

Wolfgang Finishing Glaze 3.0 is a water-based emulsion with ultra fine diminishing abrasives that gently polish the paint to a brilliant gloss. Compounding swirls, mild oxidation, and water spots disappear to reveal glassy smooth, beautiful paint. 

Wolfgang Finishing Glaze 3.0 is gentle enough to use on new OEM paint finishes, yet it is highly effective on hard, ceramic clear coats. The high concentration of microscopic abrasives smooth minor imperfections in ceramic paint and diminish to an ultra fine abrasive dust. Because these abrasives are so small, they will not mar conventional, “softer” clear coats. You’ll get consistently smooth, flawless results every time.

Wolfgang Finishing Glaze 3.0 is designed to deliver maximum performance in an easy-to-use formula. The water-based polish is low-dusting, silicone-free, filler-free, and wax-free. Menzerna’s polishes are developed for auto production so every polish they make is suitable for a body shop environment.

Wolfgang Finishing Glaze 3.0 is step 2 of a total paint makeover including Wolfgang Total Swirl Remover 3.0.

Features of Wolfgang Finishing Glaze 3.0

- Made by Menzerna

- Diminishing Abrasive Technology

- Milled and processed by Menzerna

- Low-dusting, easy clean-up

- Water-based

- No fillers, wax or silicones

- Removes 2500 grit sanding scratches

- Effective on conventional and ceramic clear coats

- Use after Wolfgang Total Swirl Remover 3.0 to restore optimum gloss

- Wolfgang Finishing Glaze 3.0 can be applied with a polisher or by hand. 

Size: 8 oz. (236 ml.)

Hand Application:

Mist the Wolfgang German Polish N Wax Applicator with Wolfgang Instant Detail Spritz to moisten the foam. Apply a 10p size amount of Wolfgang Finishing Glaze 3.0 to the applicator.

Work in a back and forth, overlapping motion until the area starts to dry. Wipe off the polish with a damp microfiber towel. Work in 2 x 2 sq. ft. sections until the entire vehicle is done.

Note: Applying Wolfgang Finishing Glaze 3.0 by hand will enhance gloss but it will not remove swirls. For paint correction, apply this product with a dual action or rotary (circular) polisher.

Machine Application:

Clean and dry the vehicle. Apply Wolfgang Finishing Glaze 3.0 out of direct sunlight.

Use a soft foam finishing pad. Apply a bead of polish to the vehicle. With the polisher turned off, spread the polish over about a 2 x 2 sq. ft. area.

Polish at 1000-1200 RPM (4 to 4.5 on a dual action polisher) working slowly across and then up and down the area. Check your work after several passes to see if the defects have been removed. If so, reduce the pressure and continue buffing until a high gloss is achieved. If the pad becomes dry, mist it with Wolfgang Instant Detail Spritz and continue buffing.

Size: 16oz (473ml)