A quick and effortless detailing system that achieves professional showroom perfect shine results using advanced rubber polymer technology. This is a process which gives the same effect as Clay Bars as used in professional body shops. The Clay Mitt is safe and easy to use, removing paint overspray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, mouldings and plastic.
The Clay Mitt can be cleaned and re-used by simply rinsing off the accumulated contaminants with water. The design of the Clay Mitt surface allows for an effortless easy gliding action over the surface when used with appropriate detail solutions such as a non acidic citrus shampoo or a high polymer content liquid such as Low on Eau. If neither of these is available water can also be used.
This mitt features a premium quality Polymer rubber on one side compared to others which are poorer quality and can damage your paintwork.
To wash, simply rinse in water and hang to dry. Do not tumble dry.
- A revolutionary alternative to the clay bar.
- Faster, more effective and safer!
- Features a microfibre cloth on one side and a Full Face Patented Advanced Polymer Rubber layer bond to one the other.
- Thoroughly clean the surface prior to use. The Clay cloth is designed to remove embedded surface contaminants such as tar and tree sap
- Can be used with a water or pH neutral car shampoo (preferred) the vehicle paint and you can remove all surface embedded contamination faster and more effectively than a clay bar.
- Can be rinsed and reused numerous times
1. Thoroughly wash the vehicle to remove all loose surface contamination. The Clay Mitt is designed to remove embedded contamination and used over a non washed surface will result in scratches
2. Pre-soak the Clay Mitt in water prior to use. Using a suitable solution, we recommend a pH neutral car shampoo, start wetting the cars surface you want to remove contamination from with the microfiber side of the Clay Mitt.
3. Pass the Clay Mitt over the wet surface. The Clay Mitt should be turned over or rinsed regularly to reduce the risk of removed contamination scratching the paintwork
4. Thoroughly rinse the surface and use a fresh microfiber cloth to dry the area. The surface should be smooth to touch. This can be verified by placing your hand in a thin plastic bag and lightly running it over the surface.
1. Do not use in direct sunlight or on surfaces over 145oF/62oC
2. To clean the Clay Mitt, rinse with water and hang to dry. Do not leave to dry with the advanced polymer rubber layer in contact with itself
3. The Clay Cloth is not solvent resistant
4. Keep out of reach of children dry!
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.